From Viper Archery Products:
BROOKVILLE, Pa. (August 22, 2019) — Designed to bridge the gap between archery hunting and competition bow sights, the Viper Archery Products Sidewinder Series provides the fastest, easiest and most precise elevation adjustments of any single-pin sights on the market. The Sidewinder and the Sidewinder XL, with its longer sight radius and windage micro-adjustment capability, are truly a dual threat on the 3D course and in the field.
The Sidewinder Series features a true competition-style up-pin that is both thin and low profile, so target blocking is extremely minimal. The stainless steel up-pin completely encapsulates and protects the 24-inch-long fiber-optic strand. The strand wraps around the housing above a reflective strip for maximum light gathering, which also makes replacement easy. The Sidewinder is available with a choice of three fiber-optic diameters: 0.010-, 0.015- or 0.019-inch.
The sight’s elevation system is the most unique feature of the Sidewinder design; it is exceptionally functional, intuitive and quick to adjust, either on the course or in the field. It requires no lock screw, handle or knob to be loosened before adjusting for distance. The archer simply turns the four-winged aluminum Sidewinder knob at the back of the sight to set it to the desired yardage. Operation is quite smooth, thanks to the Delrin® thermoplastic gear-driven transfer system, and the sight housing remains horizontal throughout the range of travel. The sight can travel from its top-most position two inches down to the bottom position in less than one full turn of the Sidewinder knob. A 0.030-inch stainless steel pin on the Sidewinder transfer bar corresponds to a strip of white marking tape on the rearmost surface of the sight. This allows the user to precisely mark distances of the specific equipment being used, and it can be replaced or taped over if the equipment setup is changed.
The Sidewinder’s aluminum sight housing has a 2-inch aperture that is threaded to accept optional Zeiss coated lenses for competition or an optional shade housing and sight light for competition or hunting, so archers can switch between target and hunting setups with ease. A highly visible 0.35-inch diameter, 1-inch-long bubble level is located at the bottom of the housing.
The Sidewinder housing unit has elevation and windage adjustments that requires use of an Allen wrench to fine-tune the head position. In addition to its longer sight radius, the Sidewinder XL also incorporates a micro-adjustable windage system that is secured by a lever lock. The XL’s micro-adjustment system allows for precise sighting-in as well as for easy adjustments in the field or on the run. The Sidewinder measures 6.75 inches in length and weighs 7.5 oz., and the Sidewinder XL is 8.5 inches long and tips the scale at 10.2 oz.
The Sidewinder Series bow sights are manufactured in the USA, and are constructed of the highest quality materials—hard-coat-anodized 6016 T6 aluminum, Delrin, brass and stainless steel up-pin, and stainless steel hardware—for maximum durability and a lifetime of worry-free use. The Sidewinder and Sidewinder XL are available now with suggested retail prices of $169.99 and $219.99, respectively, and both sights carry Viper Archery Products’ limited lifetime warranty.
About Viper Archery Products
Viper Archery Products is a wholly owned subsidiary of Koola Buck. Headquartered at 494 Service Center Rd. in Brookville, Pa., Viper Archery has been proudly manufacturing top-quality U.S.-made archery sights and accessories at its South Point, Ohio facility for more than 15 years. For more information on Viper Archery, visit www.viperarchery.com.